Email: office@ascopumps.com.ua
Ukraine
Main pagePumpsCentrifugal pumpsStainless steel centrifugal monoblock pumpsSanitary centrifugal stainless steel pump LT series
Sanitary centrifugal stainless steel pump LT series
The LT series pumps are widely used in the food industry, where the highest level of hygiene and ease of dismantling for cleaning operations are paramount.
The LT series pumps have the following features:
- Pump casing and internal components made of AISI 316 stainless steel sheet metal
- All pump components are internally and externally polished to ensure the highest level of hygiene and a good hydraulic efficiency
- The inside of the pump has been designed to prevent the build-up of the pumped product, which could compromise its hygiene
- The pump can be easily taken apart and cleaned, without having to resort to special equipment
- The 1400 RPM versions ensure a more gentle pumping action for delicate or easily emulsifiable liquids
- Lightweight and compact construction thanks to its monobloc design
- Motors compliant with IEC 72 UNEL-MEC standards, widely available in all national and international markets should they need to be replaced or repaired
- Mechanical seal with EPDM elastomers
On request, the pump is supplied with a stainless steel enclosure to protect the motor and with a base fitted with feet to support the pump.
The pumps are supplied with DIN 11851 fittings as standard or, on request, with Gas thread, Macon or Garolla.
 |
Stainless steel impeller This series of pumps can be fitted with an axial flow impeller for handling filamentous and solid-laden liquids and with an open-type impeller to ensure a higher hydraulic efficiency
|
 |
Wide operating range The LT series pumps can be fitted with 4 different pump casings to cater for a wide range of applications. They are designed to provide a flow rate from few litres to 900 litres per minute, with heads up to 35 metres |
Flow Range: up to 930 lt/min
Temperature: max 80°C
Pressure: max 6 bar
Materials: AISI 316 high thickness stainless steel
Head: up to 35 mt
This equipment includes
Industry sectors
- Dairy products
- Bakery
- Meat processing
- Brewing & beverages
- Research and development
- Pharmaceutical
- Food industry
- Confectionery
- Fruit concentrates
- Beauty and personal care
- Сleaning water
- Detergents
Applications
- Secondary processing
- Processing
- Lift
- Rinsing
- Off-loading
- Drain
- Circulation
- Loading
- Filling
- Low pressure
- Dewatering
- Treatment
Processed substance
- Hygienic liquids
- Thin liquids
- Caustic solutions
- Ultra pure water
- Molasses and syrups
- Fruit concentrates
- Soaps and detergents
- Beer
- Drinking water
- Dye pigments
- CIP fluids
- Foam protein
- Wine
- Vegetable oils
- Water
- Sauces
- Gels
- Personal care products
Features
- Stainless
- Low-noise
- Direct-drive
- CIP
- Sanitary
- Pulse-less
- Chemically resistant
- Oil-free
- High-efficiency
- Horizontal mount
- Electric
- Mechanical seal
- Rugged
Certificates
- CE
- DeliveryWe guarantee a prompt and reliable delivery of pumping equipment to any part of the country.
- InstallationWe guarantee a high quality installation work, which ensures optimal and safe operation of the pumping equipment.
- WarrantyWe provide an extended warranty period for all pumping equipment, which indicates its high quality and reliability.
Why us
6 reasons to buy hygienic centrifugal pumps from ASCO PUMPS
- High reliability. The high quality and very low internal friction make these pumps very reliable, even under severe operating conditions.
- Compactness. Very compact and lightweight pumps, which affects their performance and hydraulic efficiency.
- Reduced speed. Some models are available with a 1400 rpm motor, which provides a gentler and smoother pump movement.
- High casing thickness. High thickness steel (3 mm), which provides higher mechanical and corrosion resistance and therefore a longer service life.
- Flammable liquids. Explosion-proof motors are available for use with flammable liquids and meet ATEX standards.
- Easy dismantling. Cleaning and replacement of the mechanical seal and impeller are incredibly easy as the pump can be easily disassembled.
×
Progressive cavity pumps
Today, ASCO POMPE manufactures screw pumps that are used in a variety of industries, from wastewater treatment plants to the wine and food industry. Screw pumps are positive displacement pumps and are designed for pumping various types of liquids: viscous, abrasive, additive liquids, suspensions and dispersions. The valve-less design of the pump, the direct dependence of its performance on the engine speed, and the ability to change the direction of flow of the pumped liquid are undoubtedly the advantages of screw pumps.
more »×
Centrifugal pumps
Компанія Asco Pompe, відома на італійському ринку як лідер у виробництві насосів об'ємного типу дії, поступово розширила асортимент продукції, додавши до нього промислові відцентрові насоси. Відцентрові насоси є однією з найпоширеніших різновидів динамічних гідравлічних машин. Насоси, які пропонує компанія АСКО ПАМПС, широко застосовуються в системах водопостачання, водовідведення, в теплоенергетиці, в харчовій промисловості, в хімічній промисловості, в нафтохімічній галузі, в атомній промисловості, в авіаційній і ракетній техніці і ін.
more »×
Dosing pumps
Valisi dosing pumps for the energy, chemical, agricultural, food and other industries have proven to be reliable equipment in more than 30 countries around the world, solving the problems of dosing liquids at industrial facilities in all industries. The wide range of products offered by ASСO PUMPS, including dosing pumps with capacities from 1 to 3200 l/h, mixers, controllers and water quality sensors, allows us to meet the needs of wastewater treatment plants, drinking water treatment plants, industrial processes, food processing, landscaping and agriculture.
more »×
Lobe pumps
Кулачкові насоси це роторні лопатеві насоси універсального застосування. Насоси розроблені таким чином, щоб їх монтаж, демонтаж та обслуговування, в тому числі чистка, профілактика і ремонт, займали мінімум часу і не вимагали спеціального складного обладнання. Конструкція насосів виключає забруднення рідини, що перекачується. Сукупність цих властивостей забезпечує тривалий термін роботи обладнання. Насоси сертифіковані CE & ISO 90001.
more »×
Vacuum pumps
На заводі ASCO POMPE виробляють наступний ряд вакуумних насосів: масляні пластинчато-роторні вакуумні насоси, сухі пластинчато-роторні вакуумні насоси, сухі гвинтові вакуумні насоси, водокільцеві вакуумні насоси, автоматичні вакуумні системи, інженерні рішення в області вакуумних систем. Завдяки великому досвіду роботи і співпраці з провідними європейськими постачальниками комплектуючих, підрозділ ASCO VACUUM випускає обладнання, що має найвищий клас якості, який гарантує надійну і тривалу роботу.
more »×
Peristaltic volumetric pumps
VALISI peristaltic pumps cover a range of twenty models and two series with capacities up to 150 m3/h and pressures up to 15 bar. This type of pump can be operated in dry running mode, is seal-free, reversible, self-priming and has a high suction capacity. Two rollers or two shoes alternately compress the tubing, which is available in twelve different elastomeric materials for the widest possible range of applications in a wide variety of industries. The pumps are designed for continuous, round-the-clock operation with viscous, abrasive, solids, transfer or dosing products.
more »×
Pneumatic diaphragm pumps
Air Operated Double Diaphragm Pumps are one of the most versatile pumps on the market today. They can be purchased at a favourable price and are used in many industries to pump a wide range of liquids.
Thanks to their simple operating principles, compact and reliable design, and a wide range of materials and accessories, diaphragm pumps meet all the requirements for industrial pumping equipment.
more »×
Internal gear pumps
Internal gear pumps are self-priming positive displacement pumps with a robust and simple design (only two moving parts). This type of design allows for efficient pumping of both liquid and clean media, as well as abrasive, highly viscous media with inclusions (e.g. asphalt, chocolate, honey, etc.). The pumps can pump liquids with a viscosity of 1 cSt to 450,000 cSt. The pumps provide a uniform flow and high pressure. The following gear pump designs are available: internal eccentric gear pumps, modular gear pump, helical gear pump etc.
more »×
Accessories
Пропонуємо вашій увазі різні аксесуари для пневматичних мембранних насосів. У нашому портфоліо представлені демпфери пульсацій: Tranquilizers® - демпфери пульсацій компанії Sandpiper; пластикові і металеві демпери пульсацій виробництва Dellmeco. Також ми пропонуємо систему розподілу стисненого повітря ESADS +.
more »IF YOU DON'T FIND THE RIGHT OPTION, DON'T HESITATE TO CALL US.
WE WILL HELP YOU TO FIND THE RIGHT EQUIPMENT.
QUICK PRICE CALCULATION FOR INDUSTRIAL EQUIPMENT IN 2 STEPS
×
