Email: office@ascopumps.com.ua
Ukraine
The SOMA SINUS SODIAL® is a positive displacement pump based on the SINUS principle.The core of the pump is a sine wave, which is mounted as a disc (rotor) on a drive shaft. It gently and evenly transports the product to be conveyed through four equally divided chambers without any risk of reducing the product quality. This ensures virtually pulsation-free conveying.
The rotor rotates inside two semi-cylindrical plastic stators, forming four symmetrical rotating chambers in which the product moves. The peculiarity of the pumps' operation is that the chambers are a single unit during movement, and their volume does not change during the pumping process; therefore, the pumped medium is not subjected to any significant mechanical impact. The discharge and suction zones are separated by a plastic scraper mounted on the rotor, which helps to move the product to the outlet. The internal slip of the medium in pumps of this design is mainly determined by the width of the gaps between the rotor and plastic stators, the pump casing and the scraper. Due to the minimal deformation of the liquid, the pump is capable of pumping highly viscous substances.
The rotor rotates inside two semi-cylindrical plastic stators, forming four symmetrical rotating chambers in which the product moves. The peculiarity of the pumps' operation is that the chambers are a single unit during movement, and their volume does not change during the pumping process; therefore, the pumped medium is not subjected to any significant mechanical impact. The discharge and suction zones are separated by a plastic scraper mounted on the rotor, which helps to move the product to the outlet. The internal slip of the medium in pumps of this design is mainly determined by the width of the gaps between the rotor and plastic stators, the pump casing and the scraper. Due to the minimal deformation of the liquid, the pump is capable of pumping highly viscous substances.
SOMA SINUS SODIAL® – series SCN
SOMA SINUS SODIAL® pumps are used for a flow rate of up to 90,000 l/h. The core of the pump is a sine wave, which is mounted as a disc (rotor) on a drive shaft. It gently and evenly transports the product to be conveyed through four equally divided chambers without any risk of reducing the product quality. This ensures
virtually pulsation-free conveying.
The main seal of SOMA SINUS SODIAL® pump is available in different versions, depending on the application. Various mechanical seals and special seals are offered.
Both the maintenance of the pump and the replacement of wear parts can be carried out by the operator himself in just a few minutes. Likewise, the pump can be cleaned in its installed state in just a few minutes by means of CIP cleaning and SIP sterilization.
SOMA SINUS SODIAL® – series SCN-D, monobloc
The further development of the SOMA SINUS SODIAL® pump as a monobloc version does not require a bearing bloc, coupling or complex base plate. The operating principle is the same as for the SCN series, but in this version the SOMA SINUS SODIAL® pump is flanged directly to the drive. Also, here the core of the pump is a sine shaped rotor which is mounted on a drive shaft. It gently and evenly transports the product to be conveyed through four equally divided chambers without any risk of reducing the product quality.
Perhaps the greatest advantage is that all wear parts of the pump are identical to the classic SCN series with bearing bloc. This means that there is no need for separate storage of wear parts, because 100% interchangeability between the SCN-D and SCN series is guaranteed.
Features and benefits of SCN and SCN-D pumps series
- Smooth and gentle transfer especially when fragile particles are pumped
- Constant flow with nearly no pulsation
- High suction power
- No foaming of the product during the pumping process
- Perfect suitable for low and high viscous products
- CIP/SIP and manual cleaning able
- Heating/cooling jacket available
- Compact size
- Hygienic design
- Material of construction: stainless steel
- Energy efficient
- Simple maintenance in the system
- Full life guarantee for the pump housing and pump cover
- Temperature up to 180°C
- Viscosities up to 9.000.000 cps
- ATEX- Execution up to T4
- FDA, EG1935-2004, 3.1 certified
Flow Range: up to 90,000 l/h
Viscosity: 1cps – 9 Mio. cps
Temperature: max. 180°C
Pressure: max 15 bar
Solids: max 60 mm
Materials: stainless steel
This equipment includes
Industry sectors
- Beauty and personal care
- Dairy products
- Meat processing
- Chemical
- Brewing & beverages
- Detergents
- Oil fats and mayonnaise
- Glue
- Food industry
- Confectionery
- Fruit concentrates
Applications
- Filling
- Treatment
- Off-loading
- Distribution
- Unloading
- Loading
- Mixing
Processed substance
- Oil, fats and mayonnaise
- Wine
- Molasses and syrups
- Soaps and detergents
- Milk
- Meat
- Viscous liquids
- Beer
- Gels
- Drinking water
- Hygienic liquids
- Fruit and vegetables
- Emulsions
- Chocolate
- Adhesives
- Fruit concentrates
- Pet food
- Water
Features
- CIP
- SIP
- Horizontal mount
- Compact
- Mechanical seal
- Direct-drive
- Stainless
- Solids handling
Certificates
- FDA
- ISO 9001
- ATEX
- DeliveryWe guarantee a prompt and reliable delivery of pumping equipment to any part of the country.
- InstallationWe guarantee a high quality installation work, which ensures optimal and safe operation of the pumping equipment.
- WarrantyWe provide an extended warranty period for all pumping equipment, which indicates its high quality and reliability.
Why us
5 reasons to buy industrial pumps from ASCO PUMPS Ukraine
- All production processes are certified according to UNI EN ISO 9001/2008 standards.
- We offer our customers reliable solutions adapted to the application, operational needs and capabilities of the customer.
- All equipment is manufactured at our own plants.
- Each of the pumps we sell is thoroughly tested at the factory before being shipped to the customer. Only when our specialists are 100% sure of the integrity and performance of the equipment do they send it to you. Thus, you can be sure that the pump will serve you for a long time.
- For some of our products, preliminary design work is required, followed by installation. Our technical specialists will provide preliminary consultations and carry out the installation after the equipment has been delivered to your company. That is why we provide a guarantee for all our services.
×
Progressive cavity pumps
Today, ASCO POMPE manufactures screw pumps that are used in a variety of industries, from wastewater treatment plants to the wine and food industry. Screw pumps are positive displacement pumps and are designed for pumping various types of liquids: viscous, abrasive, additive liquids, suspensions and dispersions. The valve-less design of the pump, the direct dependence of its performance on the engine speed, and the ability to change the direction of flow of the pumped liquid are undoubtedly the advantages of screw pumps.
more »×
Centrifugal pumps
Компанія Asco Pompe, відома на італійському ринку як лідер у виробництві насосів об'ємного типу дії, поступово розширила асортимент продукції, додавши до нього промислові відцентрові насоси. Відцентрові насоси є однією з найпоширеніших різновидів динамічних гідравлічних машин. Насоси, які пропонує компанія АСКО ПАМПС, широко застосовуються в системах водопостачання, водовідведення, в теплоенергетиці, в харчовій промисловості, в хімічній промисловості, в нафтохімічній галузі, в атомній промисловості, в авіаційній і ракетній техніці і ін.
more »×
Dosing pumps
Valisi dosing pumps for the energy, chemical, agricultural, food and other industries have proven to be reliable equipment in more than 30 countries around the world, solving the problems of dosing liquids at industrial facilities in all industries. The wide range of products offered by ASСO PUMPS, including dosing pumps with capacities from 1 to 3200 l/h, mixers, controllers and water quality sensors, allows us to meet the needs of wastewater treatment plants, drinking water treatment plants, industrial processes, food processing, landscaping and agriculture.
more »×
Lobe pumps
The lobe pumps are rotary vane pumps for universal use. The pumps are designed in such a way that their installation, dismantling and maintenance, including cleaning, preventive maintenance and repair, take a minimum of time and do not require special sophisticated equipment. The pumps are designed to prevent contamination of the pumped liquid. The combination of these properties ensures a long service life of the equipment. The pumps are CE & ISO 90001 certified.
more »
×
Vacuum pumps
На заводі ASCO POMPE виробляють наступний ряд вакуумних насосів: масляні пластинчато-роторні вакуумні насоси, сухі пластинчато-роторні вакуумні насоси, сухі гвинтові вакуумні насоси, водокільцеві вакуумні насоси, автоматичні вакуумні системи, інженерні рішення в області вакуумних систем. Завдяки великому досвіду роботи і співпраці з провідними європейськими постачальниками комплектуючих, підрозділ ASCO VACUUM випускає обладнання, що має найвищий клас якості, який гарантує надійну і тривалу роботу.
more »×
Peristaltic volumetric pumps
VALISI peristaltic pumps cover a range of twenty models and two series with capacities up to 150 m3/h and pressures up to 15 bar. This type of pump can be operated in dry running mode, is seal-free, reversible, self-priming and has a high suction capacity. Two rollers or two shoes alternately compress the tubing, which is available in twelve different elastomeric materials for the widest possible range of applications in a wide variety of industries. The pumps are designed for continuous, round-the-clock operation with viscous, abrasive, solids, transfer or dosing products.
more »×
Pneumatic diaphragm pumps
Air Operated Double Diaphragm Pumps are one of the most versatile pumps on the market today. They can be purchased at a favourable price and are used in many industries to pump a wide range of liquids.
Thanks to their simple operating principles, compact and reliable design, and a wide range of materials and accessories, diaphragm pumps meet all the requirements for industrial pumping equipment.
more »×
Internal gear pumps
Internal gear pumps are self-priming positive displacement pumps with a robust and simple design (only two moving parts). This type of design allows for efficient pumping of both liquid and clean media, as well as abrasive, highly viscous media with inclusions (e.g. asphalt, chocolate, honey, etc.). The pumps can pump liquids with a viscosity of 1 cSt to 450,000 cSt. The pumps provide a uniform flow and high pressure. The following gear pump designs are available: internal eccentric gear pumps, modular gear pump, helical gear pump etc.
more »×
Accessories
Пропонуємо вашій увазі різні аксесуари для пневматичних мембранних насосів. У нашому портфоліо представлені демпфери пульсацій: Tranquilizers® - демпфери пульсацій компанії Sandpiper; пластикові і металеві демпери пульсацій виробництва Dellmeco. Також ми пропонуємо систему розподілу стисненого повітря ESADS +.
more »IF YOU DON'T FIND THE RIGHT OPTION, DON'T HESITATE TO CALL US.
WE WILL HELP YOU TO FIND THE RIGHT EQUIPMENT.
QUICK PRICE CALCULATION FOR INDUSTRIAL EQUIPMENT IN 2 STEPS
×
