Email: office@ascopumps.com.ua
Ukraine
Main pagePumpsCentrifugal pumpsStainless steel centrifugal monoblock pumpsCentrifugal axial flow pump entirely made of SS
Centrifugal axial flow pump entirely made of SS
Resistance to chemical aggression makes the EL series pumps suitable for the chemical, pharmaceutical and textile industries, the ability to pump dirty liquids makes them suitable for the treatment of general water and industrial waste, and their versatility makes them suitable for the wine and food industries.
EL series pumps have the following features:
- Stainless steel axial flow impeller suitable for handling aggressive, filamentous and solid-laden liquids
- Suitable for handling aggressive liquids
- High thickness steel (3mm) which ensures a higher mechanical and corrosion resistance, and therefore a longer life
- Very easy to take apart to clean or replace the mechanical seal
- The version fitted with a 1400 RPM motor ensures a more delicate pumping action
- Explosion proof motors can be provided to pump flammable liquids
- Low maintenance and high reliability
- Lightweight and compact design
- Mechanical seal with NBR, FPM or PTFE elastomers
On request, pumps can be supplied on a stainless steel carriage fitted with a switch.
The pumps can also be supplied with DIN 11851, Garolla or Macon fittings.
 |
Stainless steel axial flow impeller The impeller is an axial flow impeller and is entirely made of AISI 304 or 316 stainless steel. This construction makes it ideal for handling aggressive, filamentous and solid-laden liquids |
 |
Maximum hygiene The pump casing is internally and externally polished to ensure the highest level of hygiene. In addition, the internal surfaces are smooth and with no sharp edges to provide optimal efficiency |
 |
Greater safety To ensure greater safety, pumps with Atex motors are equipped with motors certified for use in more hazardous environments (Zone 2, Category 2G), although the pump is classified as Zone 2, Category 3G. |
Flow Range: up to 720 lt/min
Temperature: max 110°C
Pressure: max 3 bar
Materials: AISI 304/316 high thickness stainless steel
Dimensions: G 1, G 1 ½, G 1 ¼
Head: up to 23 mt
This equipment includes
Industry sectors
- Beauty and personal care
- Detergents
- Сleaning water
- Dairy products
- Bakery
- Meat processing
- Pharmaceutical
- Research and development
- Food industry
- Confectionery
- Fruit concentrates
Applications
- Loading
- Lift
- Sampling
- Rinsing
- Mixing
- Off-loading
- Washing
- Circulation
- Filling
- Low pressure
- Treatment
- Secondary processing
- Unloading
- Drainage
- Disinfection
- Cooling
- Drain
- Processing
Processed substance
- Beer
- Thin liquids
- Fruit concentrates
- CIP fluids
- Abrasive liquids
- Wine
- Hygienic liquids
- Molasses and syrups
- Soaps and detergents
- Milk
Features
- Mechanical seal
- Stainless
- Low-noise
- Single-stage
- CIP
- Direct-drive
- Pulse-less
- Sanitary
- Oil-free
- High-efficiency
- Horizontal mount
- Variable speed
- Compact
Certificates
- CE
- ATEX
- DeliveryWe guarantee a prompt and reliable delivery of pumping equipment to any part of the country.
- InstallationWe guarantee a high quality installation work, which ensures optimal and safe operation of the pumping equipment.
- WarrantyWe provide an extended warranty period for all pumping equipment, which indicates its high quality and reliability.
Why us
6 reasons to buy hygienic centrifugal pumps from ASCO PUMPS
- High reliability. The high quality and very low internal friction make these pumps very reliable, even under severe operating conditions.
- Compactness. Very compact and lightweight pumps, which affects their performance and hydraulic efficiency.
- Reduced speed. Some models are available with a 1400 rpm motor, which provides a gentler and smoother pump movement.
- High casing thickness. High thickness steel (3 mm), which provides higher mechanical and corrosion resistance and therefore a longer service life.
- Flammable liquids. Explosion-proof motors are available for use with flammable liquids and meet ATEX standards.
- Easy dismantling. Cleaning and replacement of the mechanical seal and impeller are incredibly easy as the pump can be easily disassembled.
×
Progressive cavity pumps
Today, ASCO POMPE manufactures screw pumps that are used in a variety of industries, from wastewater treatment plants to the wine and food industry. Screw pumps are positive displacement pumps and are designed for pumping various types of liquids: viscous, abrasive, additive liquids, suspensions and dispersions. The valve-less design of the pump, the direct dependence of its performance on the engine speed, and the ability to change the direction of flow of the pumped liquid are undoubtedly the advantages of screw pumps.
more »×
Centrifugal pumps
Компанія Asco Pompe, відома на італійському ринку як лідер у виробництві насосів об'ємного типу дії, поступово розширила асортимент продукції, додавши до нього промислові відцентрові насоси. Відцентрові насоси є однією з найпоширеніших різновидів динамічних гідравлічних машин. Насоси, які пропонує компанія АСКО ПАМПС, широко застосовуються в системах водопостачання, водовідведення, в теплоенергетиці, в харчовій промисловості, в хімічній промисловості, в нафтохімічній галузі, в атомній промисловості, в авіаційній і ракетній техніці і ін.
more »×
Dosing pumps
Valisi dosing pumps for the energy, chemical, agricultural, food and other industries have proven to be reliable equipment in more than 30 countries around the world, solving the problems of dosing liquids at industrial facilities in all industries. The wide range of products offered by ASСO PUMPS, including dosing pumps with capacities from 1 to 3200 l/h, mixers, controllers and water quality sensors, allows us to meet the needs of wastewater treatment plants, drinking water treatment plants, industrial processes, food processing, landscaping and agriculture.
more »×
Lobe pumps
Кулачкові насоси це роторні лопатеві насоси універсального застосування. Насоси розроблені таким чином, щоб їх монтаж, демонтаж та обслуговування, в тому числі чистка, профілактика і ремонт, займали мінімум часу і не вимагали спеціального складного обладнання. Конструкція насосів виключає забруднення рідини, що перекачується. Сукупність цих властивостей забезпечує тривалий термін роботи обладнання. Насоси сертифіковані CE & ISO 90001.
more »×
Vacuum pumps
На заводі ASCO POMPE виробляють наступний ряд вакуумних насосів: масляні пластинчато-роторні вакуумні насоси, сухі пластинчато-роторні вакуумні насоси, сухі гвинтові вакуумні насоси, водокільцеві вакуумні насоси, автоматичні вакуумні системи, інженерні рішення в області вакуумних систем. Завдяки великому досвіду роботи і співпраці з провідними європейськими постачальниками комплектуючих, підрозділ ASCO VACUUM випускає обладнання, що має найвищий клас якості, який гарантує надійну і тривалу роботу.
more »×
Peristaltic volumetric pumps
VALISI peristaltic pumps cover a range of twenty models and two series with capacities up to 150 m3/h and pressures up to 15 bar. This type of pump can be operated in dry running mode, is seal-free, reversible, self-priming and has a high suction capacity. Two rollers or two shoes alternately compress the tubing, which is available in twelve different elastomeric materials for the widest possible range of applications in a wide variety of industries. The pumps are designed for continuous, round-the-clock operation with viscous, abrasive, solids, transfer or dosing products.
more »×
Pneumatic diaphragm pumps
Air Operated Double Diaphragm Pumps are one of the most versatile pumps on the market today. They can be purchased at a favourable price and are used in many industries to pump a wide range of liquids.
Thanks to their simple operating principles, compact and reliable design, and a wide range of materials and accessories, diaphragm pumps meet all the requirements for industrial pumping equipment.
more »×
Internal gear pumps
Internal gear pumps are self-priming positive displacement pumps with a robust and simple design (only two moving parts). This type of design allows for efficient pumping of both liquid and clean media, as well as abrasive, highly viscous media with inclusions (e.g. asphalt, chocolate, honey, etc.). The pumps can pump liquids with a viscosity of 1 cSt to 450,000 cSt. The pumps provide a uniform flow and high pressure. The following gear pump designs are available: internal eccentric gear pumps, modular gear pump, helical gear pump etc.
more »×
Accessories
Пропонуємо вашій увазі різні аксесуари для пневматичних мембранних насосів. У нашому портфоліо представлені демпфери пульсацій: Tranquilizers® - демпфери пульсацій компанії Sandpiper; пластикові і металеві демпери пульсацій виробництва Dellmeco. Також ми пропонуємо систему розподілу стисненого повітря ESADS +.
more »IF YOU DON'T FIND THE RIGHT OPTION, DON'T HESITATE TO CALL US.
WE WILL HELP YOU TO FIND THE RIGHT EQUIPMENT.
QUICK PRICE CALCULATION FOR INDUSTRIAL EQUIPMENT IN 2 STEPS
×
